Build Facade Materials - Best to Worst
There are a wide range of building materials available that can completely change the look of a home. Each has Pros and Cons. Below are our picks from best to worst.
Fibre Cement Sheeting
Without a doubt the most popular cladding option on the marked. The most common FC sheet cladding is the James Hardie range, although many other companies provide options. FC cladding is light weight, cost effective and holds up against the weather and environmental factors very well. There are not many negatives to FC sheet cladding. It does contain silicon, so masks need to be worn when cutting it.
EPS
Also knows as expanded polystyrene. Similar to the inside of an esky, this product has high insulation properties. It is cost effective and light-weight. When rendering, a fibreglass mesh is woven into the render which makes the exterior very strong. It is used frequently on second story levels, but can be used on lower levels. It does make a mess when cutting due to the polystyrene and should be cut in an enclosed area.
ACC
Known as autoclaved aerated concrete, this product is made from injecting air into concrete panels to create a strong but light block. It directly to the frame and is rendered over. It works well as a ground floor cladding, with EPS used to match the upper levels. The main issue with ACC is that it can be brittle, especially when used on floors.
Corrugated Cladding
Pre-painted corrugated cladding either in custom orb, trimdeck or standing seam gives a nice bush/beach look with standing seam mixing well with brick. However, although the product is cheap, the labour involved in installing it, and the custom flashings required, push the pricing higher than FC sheeting in many cases. Standing seam is a very expensive product and installation is even more expensive.
Brick
Brick has a traditional look with many owners preferring the solid feel of bricks. However, one thing to note with brick is that is does not have any structural strength. The bricks are tied to the frame with the frame providing the structural stability. Brick is also susceptible to efflorescence when reacting to salts and minerals in the air, and also leaching and staining from impurities in the bricks. Brick also absorbs moisture and trap water within the brick. Brick is also expensive and labour intensive, making it an expensive option.
Block
Block is a very strong product. However, the cost has made it unfeasible for residential building. It is used for retaining walls where garages sit below ground level. However, it is very expensive and has similar efflorescence and water issues that bricks have.